Hasselblad X1 Uživatelský manuál

User Manual Flextight X5 / X1English – v/1.3

lines printed on the holder to line up the image. Handle the clear plastic layer only by the edges to avoid ngerprints. Curl the plastic layer back a

  Calibrating the scannere Flextight X5 scanner requires two types of calibration e Flextight X1 only requires one:• Both scanners require focus ca

  Focus calibratione Flextight scanner uses an adjustable zoom and focus mechanism to optimize its scanning resolution for each of the original form

  White calibration for reflectives e Flextight X5 scanner uses a white reference to make sure that all elements in the scanner’s CCD react consistent

  The light tubes e Flextight X5 contains two light tubes: one for illuminating reflective originals from above, the other for shining light through t

PRESSPULL OUTPULL OUTPRESSABDCEGHFA15

  Cleaning the external surface of the scanner e external surface of the scanner can be cleaned with a damp cloth. Be careful not to allow any moistu

  FCC Notice is equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. e

  CE – Declaration of conformity 18

  CE – Declaration of conformity 19

  Table of contents Warnings and Restrict ions 4 System Requirement s 4 Parts and components 5 Front panel 5 Back pane l and cu

© 2006 Hasselblad A/S. All rights reserved. Flextight X1 / X5 User’s Guide, Part No 75020123, revision 1.3 e information in this manual is furnished

Removal and both utilize Hasselblad’s unique FlexColor software and 3F – Flexible File Format. These features pro-duce a digital data management syste

  Warnings and restrictions • Read all of the included documentation before attempting to install and use the scanner. • Do not touch the originals an

A  Feed table is must be in the lower position for normal scanning. When scanner is not in use you can return it to closed position to protect it fr

A  Power cable socketConnect the power cable into this socket. B  FireWire interface socketsSocket for FireWire cable (max. 6 m) for computer con-nect

  Setting up the scanner Environmental requirements Set up the scanner in a location that fulfils the following requirements: • Keep the scanner away

ClosedHorizontalNormalABKLCFLEXTIGHT ORIGINAL HOLDERPATENT PENDINGIJDEGHFFor horizontal positioning lift the table free from the hinges and push.8

Operating instructions 1. It is assumed that the scanner and FlexColor software have been properly installed. 2. If not already done, lower the