
2
3
1
2
1
3
4
Continuous
In Continuous mode, the camera automatically makes exposures
and makes ready for the next exposure in a continuous manner as
long as you maintain pressure on the shutter release.
In camera active mode:
1) Press the DRIVE button on the grip.
2) Turn the front control wheel to: Continuous
3) Press Save to store the setting.
Single
In
Single
mode, an exposure is made when the shutter release but-
ton is pressed and the camera is made ready for the next exposure.
To make the next exposure however, you must rst release the
shutter release button and then press again.
In camera active mode:
1) Press the DRIVE button on the grip.
2) Turn the front control wheel to: Single
3) Press Save to store the setting.
Drive
There are two drive modes, Single and Continuous, accessed by press-
ing the DRIVE button on the grip.
In camera active mode:
1) Press the DRIVE button on the grip.
2) Turn the front control wheel to: Multi exp.
3) Turn the rear control wheel to select the number of frames
required.
4) Press Save (DRIVE button) to store the setting.
5) The LCD will display rstly that no frames have been exposed
in the multi-sequence (For example, in the case of a three
exposure setting the display will be Exp:0/3).
6) Press the shutter release button to make the rst exposure.
7) The LCD will display how many frames have been exposed
in the sequence (In the case of a three exposure setting the
display will now be Exp:1/3. After the next exposure, the LCD
would then display 2/3 etc)
8) You can change your mind at any time to exit the sequence
by pressing the DRIVE button to advance the lm to the next
frame. The camera is then prepared for another new multi
exposure sequence according to the initial setting.
Multi exposure
In Multi exposure mode, the camera does not advance the lm aer
the rst exposure, only at the end of the pre-determined number
of exposures. e frame options are: 2, 3, 4, 5 and ‘No limit’.
Komentáře k této Příručce