Hasselblad H2F Uživatelský manuál stáhnout pdf (Strana 47)

$2)6%

3 A V E

ON.OFF

(PROFILES/ESC)

$2)6%

3 A V E

1 2

$2)6%

3 A V E

Making a prole

1) Activate the camera and go through the various settings (for

example, autofocus, aperture priority, ll ash exposure com-

pensation, etc.) you require for the particular purpose and

save them as you go.

2) When all the required settings have been made, click (not

press!) the PROFILES button (ON.OFF button) on the grip

and the prole screen will appear.

3) Use either the front or rear control wheel to scroll through the

list of proles. Choose a prole name (except Standard). You

can either save the new settings under this name or change

the name you want to change.



All settings are stored when a proﬁle is created. These proﬁle set-

tings will override the settings in use at the time the proﬁle button

was pressed. In other words, remember to check for unintentional

settings when using proﬁles.

There are four proles: Standard, Full auto, Studio and Fill ﬂash. All

except Standard can be changed and renamed.

The pre-set proles feature the following:

Standard: normal ash sync, autofocus (single), single drive, autoexpo-

sure (aperture priority), average metering, user button -None

Full auto: normal flash sync, autofocus (single), single drive, pro-

grammed exposure, centre weighted metering, user button -None

Studio: normal ash sync, manual focus, single drive, manual exposure,

spot metering. user button - AF drive

Fill ﬂash: normal ash sync (adjusted output -1.7EV), autofocus (single),

single drive, autoexposure, average metering.

All user proles can be restored to default values again simply by remov-

ing the battery and holding down the MENU and DRIVE buttons to-

gether and while keeping them depressed, replace the battery. There will

be an audible signal that denotes the restoration.

Proles

The proles feature allows rapid access to pre-determined combinations

of settings that increase the speed and security of workow. One exam-

ple might be in a social situation where there might be a need for formal

outdoor portraiture followed by informal indoor handheld ash-assisted

wide-angle shots, both situations requiring very different settings in a

stressful environment. By predetermining the relevant settings required

beforehand for each situation, they can be saved collectively as a prole.

By calling up the prole, you can then be assured that all the settings are

correct at the press of one button.

For example, you might choose – autofocus single, bracketing, pro-

grammed exposure, etc – for outdoors. Once set, you would click on the

red PROFILES button, select a profile name and press SAVE. A new

name can be entered for the new prole - ‘Outdoors’, for instance - and

saved again. New settings are made for the indoor shots changing to

flash, Pv setting, etc and the procedure repeated. By simply accessing

‘Outdoors’ or ‘Indoors’ in the prole list, all the relevant settings will be

instantly and correctly implemented to match the situation.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 85 86

Komentáře k této Příručce

Žádné komentáře

Hasselblad H2F Uživatelský manuál Strana 47

Komentáře k této Příručce